MidNite Solar Clipper MNCLIP1.5KDC Wind and Hydro 1,500W DC
$1,609.00
- Description
- Additional information
Description
Description
The MidNite Solar Clipper was designed to work in conjunction with the Classic MPPT Charge Controllers to give safe reliable control of your wind turbine while also giving you true three stage charging of your batteries. The combination of the Clipper and the Classic has been proven to increase daily harvest up to 250% as well as peak power by 300% on some turbines.
The Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit.
The Clipper comes in several different resistance values. MidNite Solar can custom build the resistance values upon request and have designed an easy to change resistor insert for the Clipper allowing changes in the field. Please contact us for help picking the correct resistance.
Features:
- Three stage charging
- Reduces wear & tear on turbine
- Reduces noise from turbine controllable noise level
- AC and DC models from 1500 to 4000 watts
Important Notes:
- Generally speaking if your turbine has larger than a 6 foot rotor diameter and or is rated for 1KW or more you may need the 4KW clipper. Please consult with FMS.
- The 1,500 watt DC Clipper comes in the standard value of 2.4 ohms per phase (3 resistors 0.8ohms in series).
Additional information
Additional information
Weight | 50 lbs |
---|---|
Dimensions | 28 × 18 × 11 in |